PCB
For PCB - End to End Plunger Type
HomeProductFor PCBEnd to End Plunger Type

Features of End to End Plunger Type

End to End Plunger Type (HC Series)

Only one electronic conductor composes the electronic path from tip to bottom of spring probe. This spring probe best suits for relatively high current by erasing contact resistance occurred inside of the probe.

Specifications of End to End Plunger Type

Item Number Pitch(mm) Operating Travel(mm) Spring Force(gf) Max Stroke(mm) Life Span(Cycle) C-Res(mohm)(typ.) Current Rating(A)(typ.) Operating Temp(℃)
HCR-1.5H-15M-1 2(3)mm* 3.5mm 160gf 5.0mm 100万回 ≦0.03ohm 7A -40~120℃
HCR-1.5K(16)-15M-1 2(3)mm* 3.33mm 160gf 5.0mm 100万回 ≦0.03ohm 8A -40~120℃
HCS-3.2K(26)-23M-1 4mm 4.43mm 225gf 6.5mm 100万回 ≦0.03ohm 9A -40~80℃
HCS-3.2K(32)-23M-1 4mm 4.43mm 225gf 6.5mm 100万回 ≦0.03ohm 9A -40~80℃
HCS-4.0H-19M-2 5mm 9.6mm 300gf 17.0mm 100万回 ≦0.02ohm 11A -40~80℃

*ピッチ()はHCTシリーズ端子装着時

KITA Manufacturing Product Lineup
Spring Probe Experts

ONE STOP

PAGETOP